It should be noted right away that all wiring to the meter is under the strict control of Energonadzor. This suggests that, say, the owner of the house will not mount this part of the wiring himself, except as an exception, at the appropriate stage of construction, if the owner knows how to connect the input cable (wire) to the input breaker inside the house.

But connecting to power systems is definitely prohibited. At the same time, this information will help you have an idea:

1. How the employees you hire adhere to established rules;

2. What preparatory work will have to be done;

3. What materials, types of basic work will be required and, accordingly, how much will it cost ...

Instructions for self-installation of a satellite dish. Using these recommendations, almost anyone will be able to independently install and configure a satellite dish.

In order to install a satellite dish, we need:

1. A set of satellite equipment (receiver, antenna with a diameter of 90 cm, bracket, bracket mounting hardware, universal converter, RG-6 coaxial cable, two F-connectors).

2. Tools: compass, rotary hammer, pliers, screwdriver, wrenches, portable TV, insulation tape, extension cord for connecting to the mains.

This article will describe in detail how to configure a satellite dish to receive a television signal from the Hot Bird 13E satellite, but using this technique, you can configure your satellite dish to other satellites yourself ...

What is the very first harbinger of the new year? Right! New Year's garlands.

Santa Claus and SnegurochtoBut they come a few minutes before the new year, they decorate the Christmas tree a few days before the holiday, and New Year's garlands create a festive mood for several weeks or even months, before the holiday. And they remove the New Year's garlands only after all the celebrations have ended, the Christmas tree has been dismantled, New Year's toys are hidden, and Santa Claus and the Snow Maiden have left for their winter residence.

So, you decided to buy New Year's garlands in order to decorate your home, office, shop or stall. What to look for when choosing New Year's garlands, first of all? What to be guided by? ...

Did the house lamp burn out? The easiest way is to throw it in the trash, but you can make it ... another, and if there are several lamps that have burned down, then you can do it .... by repair.

If you at least once held a soldering iron in your hands, then this article is for you.

You can turn on the fluorescent lamp up to 30 watts, without a starter and throttle, using a small scarf removed from our economy lamp. At the same time, it will light up instantly, with a decrease in voltage will not ‘Blink’. This lamp burns out in two ways ...

The article will be interesting to people who decided to independently change the wiring in the apartment, house.

If you believe the statistics, the average homeowner (sorry for the officialdom) makes cosmetic repairs every 3-5 years, major repairs - once every 8-12 years. What is a facelift? This is a replacement for wallpaper, painting the ceiling, walls, windows, batteries ... That is, repair without significant investments.

Overhaul implies something more that requires significant financial costs. With major repairs, many change plumbing, heating appliances, tiles in bathrooms and in the kitchen. Someone is changing the flooring. Instead of old linoleum, they lay a laminate. There are many options.Everyone makes repairs based on their financial capabilities.

During the repair process, do not forget about the wiring ...

Some simple tricks that will greatly facilitate your work and keep your nerves when working with a hammer and nails.

It seems to be a simple job - driving nails. But for some people, this procedure is quite a difficult task. And, when it is necessary to urgently hammer a nail, according to the law of world swine, no one who knows how to do this is nearby. And so here are some tips for beginners to nail

1) Hold the hammer by the end of the handle. When striking, look at the nail head. Then the nail will not bend and go aside, and you will not hit the fingers.

2) It is necessary to hold a long nail with pliers in the middle, so that when hammering it does not bend ...

Recessed spotlights today have become the same mundane normal thing in the interior of a house, apartment, office as an ordinary chandelier or fluorescent lamp.

Many probably paid attention to the fact that sometimes light bulbs, if there are several, in these same spotlights shine differently. Some lamps shine quite brightly, while others burn, at best, at half light. In this article we will try to deal with the essence of the problem.

So, for starters, a little theory. Halogen bulbs installed in recessed spotlights are designed for operating voltage of 220 V and 12 V. In order to connect bulbs designed for voltage of 12 V, a special transformer device is required ...

A detailed story about the popular "laser-ironing" technology for the manufacture of printed circuit boards, its features and nuances.

Printed circuit boards in radio engineering have been used for a very long time. At home or in factory electrical laboratories involved in the repair of electrical equipment, such boards had to be painted manually with various varnishes. Tools for drawing were used in a wide variety of ways, from just a sharpened match to needles from a syringe and glass drawing pens.

Now computer technology has penetrated into all spheres of human activity, including amateur radio. Printed circuit boards by hand are now no longer necessary, unless very simple, which can even be cut with a knife. But first things first ...