Starry Sky LED Backlight

The purpose of the kit is "Starry Sky". Description, features.

The luminous starry sky is intended for decorative illumination of ceilings, POS materials, the creation of light-dynamic shows and all kinds of decorative elements.

"Starry sky" consists of LED dots sequentially soldered into a loop, which go in a loop with ballast resistors.

You can control this light with the help of controllers, to which you can connect any number of channels, you can control the dynamic light and embedded scripts in these controllers, special infrared remotes are often used with such controllers.

The LED points of the "Starry sky" can be soldered in a complex manner by one LED with two wires, two LEDs with three wires and three LEDs with four wires and so on. They are soldered at different distances: from 500 mm to 999 mm and from 1000 mm to 2000 mm.

You can also choose a different double angle of half brightness of the LEDs 20 °, 32 °, 42 ° and 100 °. Which gives more lighting options, namely narrow-angle, focused or wide-angle lighting.

Starry Sky LED Backlight

3-channel controller with remote control module

16 channel controller with Dmx management

In addition to controlling the light, you can complement the picture of "Starry Sky", so that you can combine different colors, such as: white, red, yellow, blue, blue-green, green. Well, or you can just use the full color version (RGB).

It should be added that such an LED design is very bright and colorful, very original, as well as absolutely fireproof and consumes very little electricity.

"Starry sky" is an original approach to highlighting any object: cafe, restaurant, any advertisement and will contrast with any interior.

Article is written for the site https://env.electricianexp.com