Work as an electrician is not always assembling and repairing circuits and laying cables. To lay a line, install sockets, hang fixtures, you need to properly make holes or hollow out a recess. To do this, you need to know the main types of drills and the features of their use. In this article, we will look at how to drill a hole in concrete, wooden walls and metal surfaces.

In everyday life, for basic construction work, use screwdrivers, drills, impact drills and perforators. A screwdriver is a small device designed to wrap screws and self-tapping screws in non-solid materials. They are also suitable for drilling drywall chipboard, plywood, wood and its other derivatives. Suitable for drilling not too thick metal. They are wireless and wired. The characteristics of cordless screwdrivers usually indicate not the power, but the battery voltage ...

Summer residents who ennoble their plot, have to deal with the need to lay wires to connect lamps in the yard, electrify workshops, garages and sheds. The line can be laid underground, but then you need to dig trenches, use expensive armored cables, PND-corrugation and so on for laying. As a result, the volume and cost of the work are quite large. Another option is to lay the line through the air. In this article we will tell you how to lay a wire through the air in the country or in a country house.

To conduct light and install sockets in utility rooms in a summer cottage or in the courtyard of a private house, you need to decide how to lay the cable. We will make a reservation that any building can be in the role of an outbuilding - a barn, workshop, garage and bathhouse. There are three options: laying along the fence and walls, underground cable entry into the building, and laying the cable through the air ...

When repairing an apartment, special attention should be paid to competent wiring. If you miss this moment, a lot of inconvenience may appear, such as a lack of sockets or their placement behind furniture, too few lighting fixtures or an incorrect lighting scheme. It does not matter whether you do the repair of the wiring yourself or hired specialists - these tips will be useful to you in any case.

The first step is to evaluate: how many electrical appliances will be powered in the room. Then you can find out the exact number of outlets. This should be done when you have already made a plan for future repairs and know the approximate location and dimensions of the furniture. Next, you need to decide where the working area will be, and where the recreation area is - it is also necessary for the distribution of outlets and not only. In this matter, an important role is played by lighting. For any room with a universal and convenient solution ...

To perform electrical work: dismantling and installing electrical wiring, installing and connecting various equipment, repairing electrical wiring, preparing plugs, holes and recesses for laying electrical wiring, etc., you will need a wide variety of tools - from simple screwdrivers, measuring instruments, right up to the shtroborez or punch.

The choice of tools for electrical work is largely dependent on the place of use (for example, homework, field work, work at the enterprise), as well as the professional skills of an electrician, electrician. It should be borne in mind that the speed and quality of the work performed will directly depend on the quality and functionality of the tool.Consider the most common tools, fixtures and materials needed to perform electrical work.There is no way to do without this tool ...

Underfloor heating is used as an addition to the heating system, for heating local areas of the floor, for example in the bathroom, or on the balcony. As well as the main type of heating, this method of use is less common. There are several types of implementation of this system, each has its own advantages and disadvantages. In this article we will look at how to make an electric heated floor with our own hands, and also consider the differences in the types of heating.

Most often it is installed in the kitchen and in the bathroom. The reason for this is the high humidity in these rooms, in addition, with high humidity, the cold is felt more strongly. When you leave the bath, it becomes much more pleasant to become on the warm floor than on a cold tile. And in the bathrooms of most apartments there are no heating radiators. Therefore, installing a warm floor will increase the overall temperature in the apartment. Often installed near pools, in baths, toilets ...

The heating cable has found many uses, it is used to heat the floor, the greenhouse, to prevent freezing of pipes and to defrost them. It is also convenient to use it for heating the roof, so that the snow will not linger on it, and you will avoid the descent of snow and ice blocks from the roof. Usually it is sold a fixed length for a specific situation, but still, in case of damage or the need to increase the length - you have to connect.

In principle, the process consists in simple twisting or sleeving of conductive conductors, but there are some nuances that depend on the type of cable. There are two types of cables: resistive and self-regulating. In resistive electricity is converted into heat due to the high resistance of conductive wires. They are divided into two subspecies - ordinary single-core and two-core resistive cables and zonal. Please note when buying a single-core cable that both ends of it ...

Electric stoves and ovens are often used in the home kitchen. Moreover, the choice of the type of stove does not depend on the presence of gas in the house. However, these are powerful electrical appliances and the recommendations for their connection must be followed. It should be noted that the wiring must be designed for the power of these consumers in order to avoid emergency situations. In this article we will talk about the intricacies of connecting to a network of kitchen electrical equipment.

If you have both an electric oven and a hob installed, the first thing you need to do is decide on the models and recommendations of the manufacturers. In some cases, the stove and oven are connected independently of each other, but if these are models from the kit of the same manufacturer, you need to look in the instructions, maybe they should be interconnected. Connecting the cord to the electric stove, depending on the manufacturer, the cord can be removable or non-removable ...

Modern household electrical panels are significantly different from those that were in the last century. Particular changes were made in the assembly of the circuit and the breakdown of consumers into groups, as well as the introduction of protective devices such as RCDs or difavtomatov. The materials used have also changed. But first things first, in this article we will talk about the features of the assembly of modern electrical panels.

Typically, a counter was installed in the apartments, plugs with fuses or automatic plugs and everything, then there was wiring in the rooms.In the best case, a counter was installed with two pairs of traffic jams, then the load could be distributed among the rooms and the ability to disconnect each of them separately. Now apartments have more powerful consumers of electricity and, at a minimum, separate circuit breakers. As a result, the approximate wiring diagram of a modern apartment will turn out this ...